If it needs, then apply the oil more after the bit starts to turn. A single drop of the oil is enough to lubricate the bit. Take lubricant oil and apply it to the point of the bit. But there is a simple way to solve this problem. When you start to drill through stainless steel then the bit can lose the temper of its sharp edge. Picking the right drill bit for the stainless steel sink to make holes is not the last thing. If you are not satisfied with the indentation, then strike it more. This strike should be hard enough to make a perfect indentation. Take a hammer and strike it on the top of the nail. Take a nail set and hold the point on the mark on the sink. This indentation should be small in size. But making an indentation can prevent this problem. When the drill starts spinning, it can skip across the surface of the sink. Most of the professionals use this method.

This is another important step that you should follow. This is the spot where the hole will be made. Place it on the spot on the sink surface. Masking tape is needed to make a mark on the spot. Another good way to select the spot is by measuring the distance from the sink to the place where you are going to use the fixture. It will help to identify the right place to drill. To confirm the spot you should survey underside of the sink. It is much needed to complete the process perfectly.

First of all the potential damage to fixtures under the sink and the second one is the distance from pipes. Before you start to select the spot two things you should consider. Confirm the spot because after drilling there is no way to undo it. In the first step, identify where you need to drill to make holes in the sink.

Step 1 – Find The Spot To Drill Your Hole

Drill bit for holes in utility sink